Aluminum sealing ring, M14 x 18 mm.

Our M14 x 18 aluminum sealing ring (washer) is suitable for the following vehicles (the quantity required per vehicle is given between parentheses for each of the following applications):

- this aluminum washer is used as a sealing ring for the temperature sender located on the fuel pump support plate in the following vehicles: 

Porsche 911 (1965-1969) (2)

         Porsche 911 S (1967-1969) (2)

Porsche 911 T (1968-1969) (2)

Porsche 911 L (1968-1969) (2)

Porsche 911 E (1969) (2)

- this aluminum washer is used as a sealing ring for the temperature sender located on the engine case oil breather cover in the following vehicles :

Porsche 911 E (1969) (1)

Porsche 911 S (1969) (1)

Porsche 911 E (1970-1973) (1)

Porsche 911 S (1970-1973) (1)

Porsche 911 TE (1972-1973) (1)

Porsche 911 Carrera 2.7 (1973) (1)

Porsche 911 Carrera 2.7 (mechanical fuel injection) (1974-1976) (1)

- this aluminum washer is used as a sealing ring for the temperature sender located below the left-side  timing case cover in the following vehicles :

Porsche 911 (1974-1977) (1)

Porsche 911 S (1974-1977) (1)

Porsche 911 Carrera 2.7 (1974-1976) (Mecanical Fuel Injection) (1)

Porsche 911 Carrera 3.0 (1976-1977) (K-Jetronic) (1)

Porsche 911 Turbo 3.0 L Type 930 (1975-1977) (1)

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1976-1977) (1)

Porsche 911 SC 3.0 L (1978-1983) (1)

Porsche 911 Turbo 3.3 L Type 930 (1978-1983) (1)

Porsche 911 Turbo 3.3 L  Type 930 (1984-1989) (1)

Porsche 911 Turbo “Slant Nose” (1988-1989) (1)

-this aluminum washer is used as a sealing ring for the check-valve on the air filter housing for the vacuum system in the clutch release mechanism for the following vehicles equipped with a Sportomatic transmission :

Porsche 911 T- K with Sportomatic transmission (1972-1973) (USA) (1)

         Porsche 911 SC 3.0 L with Sportomatic transmission (1978-1980) (1)

- this aluminum washer is used as a sealing ring for the M14 hex bolt on the airbox of the following vehicles:

Porsche 911 SC 3.0 L (1978-1983) (1)

Porsche 911 SC 3.0 L with Sportomatic transmission (1978-1980) (1)

- this aluminum washer is used as a sealing ring part of the complete engine gasket set for the following vehicles:

Porsche 911 E (1969) (2)

Porsche 911 S (1967-1969) (2)

Porsche 911 E (1970-1973) (1)

Porsche 911 S (1970-1973) (1)

Porsche 911 TE (1972-1973) (1)

Porsche 911 TK (1973) (1)

Porsche 911 TK SPM (1972-1973) (USA-CAN) (1)

Porsche 911 T (1970-1971) (1)

Porsche 911 TV (1972-1973) (1)

Porsche 911 Carrera 2.7 (1973) (1)

- this aluminum washer is used as a sealing ring part of the upper engine gasket set for the following vehicles:

Porsche 911 Manual and Sportomatic transmission (1974-1977) (2)

Porsche 911 S Manual and Sportomatic transmission (1974-1977) (2)

Porsche 911 Carrera 2.7 (1974-1976) (Mecanical Fuel Injection) (1)

Porsche 911 Carrera 3.0 Manual and Sportomatic transmission (1976-1977) (K-Jetronic) (2)

Porsche 911 Turbo 3.0 L Type 930 (1975-1977) (1)

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1976-1977) (1)

Porsche 911 SC 3.0 L (1978-1983) (2)

Porsche 911 SC 3.0 L Sportomatic transmission (1978-1980) (2)

Porsche 911 Carrera 3.2 L (1984-1989) (2)

Porsche 911 Carrera 3.2 L Speedster (1989) (2)

Porsche 911 Carrera “Slant Nose” (1988-1989) (2)

This M14 x 18 mm. sealing ring is used when replacing the engine temperature sender reference 911.020110

Note : this part is sold separately, except when it is included with on of our gasket sets.