0 products(s) / 0.00 €
Français English espanol
Top > 914 > ENGINE > UPPER ENGINE > Complete cylinder and piston set, 4 pieces 914-4 2.0 L (73-76)

Complete cylinder and piston set, 4 pieces 914-4 2.0 L (73-76)

Complete cylinder and piston set, 4 pieces 914-4 2.0 L (73-76)
914.010076
Qty 
 Last products 780.00 € TTC
650.00 € HT
Buy Now

Our complete piston and cylinder set is used as factory equipment on the following vehicle models that are fitted with 1.6 L engines developing 100 HP:

    Porsche 914-4 2.0 L European Version 74 Kw / 100 HP. (1973-1976) *

Additionnally, this complete piston and cylinder set can also be used on the following versions of the 2.0 L 914-4 versions that are configured for the North American market:

     Porsche 914-4 2.0 L USA Version 70 kw / 94 HP. (1973-1974) **

     Porsche 914-4 2.0 L USA / California Versions, 65 kw / 87 HP. (1975-1976) **

Notes:

* Includes the following vehicles:

Year

Model

Engine Type

From Engine Number:

Displacement

Power

1973

914-4 2.0 L

European Version

039

M GB0000001 >>

2000 cc.

74 kw / 100 HP.

1974

914-4 2.0 L

European Version

039

M GB0007402 >>

2000 cc.

74 kw / 100 HP.

1975

914-4 2.0 L European Version

039

M GB0009822 >>

2000 cc.

74 kw / 100 HP.

1976

914-4 2.0 L European Version

039

M GB0010779 >>

2000 cc.

74 kw / 100 HP.

** Includes the following vehicles:

Year

Model

Engine Type

From Engine Number:

Displacement

Power

1973

914-4 2.0 L

USA Version

039

M GA0000001 >>

2000 cc.

70 kw / 94 HP.

1974

914-4 2.0 L

USA Version

039

M GA0006766 >>

2000 cc.

70 kw / 94 HP.

1975

914-4 2.0 L

USA - California

039

M GC0000001 >>

2000 cc.

65 kw / 87 HP.

1976

914-4 2.0 L

USA- California

039

M GC0002 915 >>

2000 cc.

65 kw / 87 HP.

This complete piston and cylinder set from Malhe which is installed as original factiry equipment for vehicles sold in Europe has pistons with flat tops with a 8.0:1 compression ratio.

After installing this piston and cylinder set on a 2.0 L 914-4 sold in the USA, you will gain about 5 HP. in power. Your engine’s compression ratio will go from 7.6:1 (on American versions of the 2.0 L engine with pistons tops with an outer edge) to 8.0:1 (on European versions of the engine fitted with flat-top Mahle pistons). The difference in compression ratio and power between the USA and European-spec engines is explained by the fact that engines in American-spec vehicles used a type of fuel with a lower octane rating. However, ou Malhe piston and cylinder set with an 8.0:1 compression ratio can safely be fitted to an American car because of the higher octane rating of today’s fuels.

This complete set contains 4 individual cylinders, 4 pistons with their piston pins and complete sets of rings ready for installation.

Piston diameter: 94 mm. 3 ring grooves

Bore surface: machined cast iron.

Quantity required per vehicle: 1 set of 4 pistons and cylinders

  Available   Last products   Out of stock
Tell A Friend Tell A Friend
Share



Sauf mention contraire les prix sont indiqués en Euros TTC et hors frais de port.x