0 products(s) / 0.00 €
Français English espanol
Top > 911 > EXHAUST SYSTEM > CROSSOVER PIPE > M6 locknut for exhaust clamp halves, 911 (75-83) + 911 Turbo (75-82)

CROSSOVER PIPE

M6 locknut for exhaust clamp halves, 911 (75-83) + 911 Turbo (75-82)

M6 locknut for exhaust clamp halves, 911 (75-83) + 911 Turbo (75-82)
911.010489C
Qty 
 Available 0.60 € TTC
0.50 € HT
Buy Now

Our M6 sized locknut has several uses in the exhaust system of Porsche vehicles:

 

- as a locknut to fasten the clamp halves between the wastegate exhaust pipe and the rear exhaust muffler:

 

Porsche 911 Turbo 3.0 L Type 930 (1975-1977)

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1975-1977)

 

Porsche 911 Turbo 3.3 L Type 930 (1978-1982)

 

Quantity required per vehicle in this application: 2

 

- as the locknut to fasten the clamp halves between the crossover tube and the intermediate exhaust flange, this locknut is used in the following vehicles:

 

Porsche 911 2.7 L (1975-1977)              

Porsche 911 S 2.7 L (1975-1977)

 

Porsche 911 Carrera 3.0 L (1976-1977)   

 

Porsche 911 SC 3.0 L (1978-1983)

Porsche 911 SC 3.0 L Sportomatic (1978-1980)

 

Porsche 911 Carrera 3.2 L (1984)

 

Quantity required per vehicle in this application: 2

 

- as the locknut for the wastegate pipe heat shield :

 

Porsche 911 Turbo 3.0 L Type 930 (1976-1977)

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1975-1977)

 

Porsche 911 Turbo 3.3 L Type 930 (1978-1989)

 

Porsche 964 Turbo 3.3 L (1991-1992)                        

         Porsche 964 Turbo 3.6 L Type 965 (1993-1994)

 

Quantity required per vehicle in this application: 2

 

- as the locknut to fasten the exhaust sealing flange from the wastegate exhaust pipe to the exhaust collector:

 

Porsche 944 Turbo (1986-1991)*

         Porsche 944 Turbo S (1987-1988)

 

* from chassis Number 95GN1 01001 (1986)

                              

Quantity required per vehicle in this application: 2

        

Note: cette pièce est vendue séparément.

 

During the installation of the crossover pipe on your naturally-aspirated Porsche 911, you will need the following components:

 

911.010488: Crush gasket, crossover pipe to intermediate exhaust flange, 911 (75-83)

911.010488A: Half clamp, wastegate pipe to intermediate exhaust muffler flange, 911 (75-83)

911.010489: Crush washer, crossover pipe to intermediate exhaust flange, 911 (75-83)

911.010489B: Exhaust half-clamp bolt, M6 X 40 mm. 911 (75-83) + 944 Turbo (86-91) + 944 Turbo S (87-88) (2)

 

This part has other uses in the Porsche spares program that are not listed here. Please check with us if you require further information.

  Available   Last products   Out of stock
Tell A Friend Tell A Friend
Share

Nous vous conseillons les produits suivants 

Crush washer, crossover pipe to intermediate exhaust flange, 911 K-Jetronic (75-83)
Crush washer, crossover pipe to intermediate exhaust flange, 911 K-Jetronic (75-83)
 Available   4.80 € TTC
Add to Cart
Half clamp, wastegate pipe to intermediate exhaust muffler flange, 911 (75-83)
Half clamp, wastegate pipe to intermediate exhaust muffler flange, 911 (75-83)
 Available   10.80 € TTC
Add to Cart
Bolt, M6 x 40 mm., for exhaust half-clamp, 911 (75-83) + 944 Turbo (86-91) + 944 Turbo S (87-88)
Bolt, M6 x 40 mm., for exhaust half-clamp, 911 (75-83) + 944 Turbo (86-91) + 944 Turbo S (87-88)
 Available   0.60 € TTC
Add to Cart



Sauf mention contraire les prix sont indiqués en Euros TTC et hors frais de port.x