911.010472 EXHAUST HARDWARE KIT, 911 (75-89)

To streamline the reassembly process of your Porsche 911’s exhaust system, we have on offer an exhaust system hardware kit that is suitable for use in the following vehicles :

Porsche 911 2.7 L (1975-1977)     

Porsche 911 S 2.7 L (1975-1977)  

Porsche 911 S Carrera 2.7 L (1975-1977*) (USA-CAN)

Porsche 911 S Carrera 2.7 L (1975-1977*) (Version for California and Japan)

Porsche 911 Carrera 2.7 L 155 KW / 209 HP. (1975-1976) 911.83

Porsche 911 Carrera 3.0 L (1976-1977)   

* Models equipped with heat exchangers and thermal exhaust reactors

Porsche 911 SC 3.0 L (1978-1983)

Porsche 911 SC 3.0 L Sportomatic (1978-1980)

Porsche 911 Carrera 3.2 L (1984-1989)

Porsche 911 Carrera 3.2 L Turbo-Look (1984)

Porsche 911 Carrera 3.2 L Speedster (1989)

Porsche 911 Turbo 3.0 L Type 930 (1975-1977)

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1975-1977)

Porsche 911 Turbo 3.3 L Type 930 (1978-1989)

This exhaust hardware kit includes the following parts with their respective quantities as follows :

- 12 x 911.010472A1: Exhaust manifold hexagonal head bolt M8 X 40 mm., 911/ 911 Turbo (75-94) + 993   

This exhaust hex bolt is used to fasten together the different components of the exhaust system (i.e. heat exchangers to crossover pipes to intermediate muffler to rear exhaust muffler) for the 911 and 911 Turbo from 1975 to 1989.

         - 12 x 911.010472A: Exhaust lock nut, M8, 911 (75-89) + 911 Turbo (75-94) + 924/924 S/Turbo/GT (76-88) + 944 (82-87)

This exhaust lock nut is used to fasten together the different components of the exhaust system (i.e. heat exchangers to crossover pipes to intermediate muffler to rear exhaust muffler) for the 911 and 911 Turbo from 1975 to 1989. It is also used to fasten the heat exchanger flanges to the cylinder head exhaust studs for the 911 Turbo from 1984 to 1989.

         - 6 x 911.010479A: M8 nut 912 + 911  (65-89)

This exhaust nut is used – amongst other uses- to fasten the heat exchanger flanges to the cylinder head exhaust studs for the 911 from 1975 to 1989.

         - 6 x 911.010479: Allen exhaust barrel nut, 911 (65-98) + 911 Turbo (75-89) + 993 Turbo (95-98) + 914-6 (70-72)

This Allen exhaust barrel nut is used to secure the heat exchanger bodies to the engine crankcase and the cylinder heads for the 911 and 911 Turbo from 1975 to 1989.

The hardware in this kit will enable you to reassemble the main components of your Porsche’s exhaust system from 1975 to 1989 quickly and practically. Depending on your vehicle model and setup, quantities required for each individual reference may vary. The complete applications’ list for each of the parts above, mounting locations and the quantities required can be found in the detailed description of each component.

Exhaust hardware kit contents: 36 pieces.

Note: To order this 36-piece kit, go to the product description of each individual reference by clicking on the links above. You will then be able to order each type of reference in the desired amount. Quantities given in the complete kit are for information purposes only and may vary according to vehicle setup and model.  

Remarks: When taking apart any component of your Porsche’s exhaust system, it is recommended to replace all the related exhaust gaskets to ensure a leak-proof system after reassembly.