Bolt for the release bearing guide tube 911 (76-98) + 911 Turbo (87-98) + 996 GT3/GT3 RS

Our bolt to secure the clutch release bearing guide tube is used as original equipment on the following vehicle models:

     Porsche 911 2.7 L (1976-1977)

     Porsche 911 S 2.7 L (1976-1977)

     Porsche 911 Carrera 3.0 L (1976-1977)

     Porsche 911 SC 3.0 L (1978-1983)

     Porsche 911 Carrera 3.2 L (1984-1989)

     Porsche 911 Carrera 3.2 L Turbo-Look (1984-1989)

     Porsche 911 Turbo 3.3 L (1989)

     Porsche 964 Carrera 4 3.6 L (1989-1994)

     Porsche 964 Carrera 2 3.6 L (1990-1994)

     Porsche 964 Carrera RS / RS America 3.6 L (1992-1994)

     Porsche 964 Carrera 2 / Carrera 4 Turbo-Look 3.6 L (1991-1994)

     Porsche 964 Turbo 3.3 L (1991-1992)

     Porsche 964 Turbo 3.6 L (1993-1994)

     Porsche 993 Carrera 3.6 L (1994-1998)

     Porsche 993 Carrera 4 3.6 L (1995-1998)

     Porsche 993 Carrera RS 3.75 L (1995-1996)

     Porsche 993 Carrera S 3.6 L (1996-1998)

     Porsche 993 Carrera 4S 3.6 L (1996-1998)

     Porsche 993 Carrera Turbo-Look 3.6 L (1996-1998)

     Porsche 993 Turbo 3.6 L (1995-1998)

     Porsche 993 Turbo S 3.6 L (1997-1998)

     Porsche 996 GT3 3.6 L (1999-2001/2003-2005)

     Porsche 996 GT3 RS 3.6 L (2004)

Notes:

This bolt is not used on vehicles in the list above that are equipped with Sportomatic or Tiptronic transmissions.

Bolt dimensions: M6 x 14 mm.

Quantity required per vehicle: 2