Transmission input shaft seal, 911 (87-98) + 911 Turbo/GT2 (89-12) + 996/997 GT3 (98-12) + 959

Our transmission input shaft seal is used as original equipment in the following vehicle models:

     Porsche 911 Carrera 3.2 L with G50 5-speed transmission (1987-1989)

     Porsche 911 Turbo 3.3 L with G50 5-speed transmission (1989)

     Porsche 964 Carrera 4 3.6 L (1989-1994)

     Porsche 964 Carrera 2 3.6 L (1990-1994)

     Porsche 964 Carrera RS / RS America 3.6 L (1992-1994)

     Porsche 964 Carrera 2/ Carrera 4 Turbo-Look 3.6 L (1991-1994)

     Porsche 964 Turbo 3.3 L (1991-1992)

     Porsche 964 Turbo 3.6 L (1993-1994)

     Porsche 993 Carrera 3.6 L (1994-1998)

     Porsche 993 Carrera 4 3.6 L (1995-1998)

     Porsche 993 Carrera RS 3.75 L (1995-1996)

     Porsche 993 Carrera S / Carrera 4S 3.6 L (1996-1998)

     Porsche 993 Carrera Turbo-Look 3.6 L (1996-1998)

     Porsche 993 Turbo 3.6 L (1995-1998)

     Porsche 993 Turbo S 3.6 L (1997-1998)

     Porsche 996 Turbo 3.6 L (2001-2005)

     Porsche 996 GT2 3.6 L (2001-2005)

     Porsche 997 Turbo 3.6 L (2007-2009)

     Porsche 997 Turbo GT2 3.6 L (2008-2009)

     Porsche 997 Turbo 2^nd generation 3.8 L (2010+2012)

     Porsche 997 Turbo S 2^nd generation 3.8 L (2011-2012)

     Porsche 997 Turbo GT2 RS 3.6 L (2011)

     Porsche 996 GT3 3.6 L (1999-2001/2004-2005)

     Porsche 996 GT3 RS 3.6 L (2004)

     Porsche 997 GT3 3.6 L (2007-2009)

     Porsche 997 GT3 3.8 L (2010-2011)

     Porsche 997 GT3 RS 3.8 L (2011)

     Porsche 997 GT3 RS 4.0 4.0 L (2012)

     Porsche 9592.85 L (1987-1988)

This input shaft seal ensures that the transmission case is leak-proof at the input side of the main power shaft. It is not used on vehicles that are equipped with Tiptronic transmissions.

Seal dimensions: 26.5 x 40 x 12 mm.

Quantity required per vehicle: 1